Welcome to Demih Water---Water treatment chemical and equipment supplier

Inhibitor ZP8506 Corrosion & Deposit Control

Inhibitor ZP8506 is a custom blend of phosphate, zinc and polymer designed to economically inhibit corrosion of mild steel and prevent deposition
of inor-ganic materials in mill supply water systems and once-through cooling systems.


0.00
0.00
  

Inhibitor ZP8506 is a custom blend of phosphate, zinc and polymer designed to economically inhibit corrosion of mild steel and prevent deposition
of inor-ganic materials in mill supply water systems and once-through cooling systems.


Inhibitor ZP8506 Corrosion & Deposit Control

 

 

Mild steel corrosion inhibitors and deposit control agents for once-through/mill supply cooling
systems

 

Combinations of phosphate, zinc and polymer

 

Custom blended one-drum treatment

 

DESCRIPTION AND USE

 

Inhibitor ZP8506 is a custom blend of phosphate, zinc and polymer designed to economically inhibit
corrosion of mild steel and prevent deposition of inor-ganic materials in mill supply water systems
and once-through cooling systems.

 

If this corrosion is not controlled, iron byproducts introduced into the system can lead to numerous
problems, which include reduced heat transfer, restricted water flow, deposits and sludging. These
problems can seriously impede operations that the once-through cooling water is servicing. Inhibitor
ZP8506 can minimize formation of corrosion prod-ucts, and consequently improve operating conditions
throughout the plant.

 

Inhibitor ZP8506 is designed to operate over a broad temperature range in once-through and mill
supply water systems, and is especially effective for control-ling deposition typically generated in hot
water sys-tems. Inhibitor ZP8506 can be fed at a single loca-tion to treat the entire system and supplemental
dosages may be fed in particularly troublesome areas.

 

TREATMENT AND FEEDING REQUIREMENTS

 

The treatment level for Inhibitor ZP8506 will depend on many factors such as the severity of corrosion
potential and conditions particular to a given applica-tion. This product is an excellent choice for pasteurizes.
The product should be used in accordance with control procedures that GE Betz establishes for a specific
application.

 

Dilution - Inhibitor ZP8506 may be fed directly from the shipping container or diluted to any convenient
strength.

 

Feed Equipment - Tanks, pumps, piping, and valves should be made of 316 stainless steel or most
common plastics. Avoid the use of mild steel and copper alloys.

 

Monitoring - A photometric procedure can be used to monitor the zinc concentration in the treated water.

 

GENERAL PROPERTIES

 

Physical properties of Inhibitor ZP8506 are shown on the Material Safety Data Sheet, a copy of which
is available upon request.

 

PACKAGING INFORMATION

 

Inhibitor ZP8506 is a liquid blend, supplied in 55-gal-lon (208-liter), bung-type, nonreturnable steel drums.
In addition, it is also available under the GE Betz Semi-Bulk Control™ and Point of Feed Delivery
Programs for contracted quantities in certain geo-graphic areas.

 

STORAGE

 

Protect from freezing. If this product is frozen during shipment or storage, slight mixing may be required
to ensure homogeneity.

 

SAFETY PRECAUTIONS

 

A Material Safety Data Sheet containing detailed information about this product is available upon request.

 

   Products&Service

   RO Water Treatment​​
   Sewage Water Treatment
    Swimming Water Treatment
    ​ ​Bolier Water Treatment
    Cooling Water Treatment
    Drinking Water Treatment
 
   Connect with Us

   Linkedin

   Facebook

   Youtube
   



   DemiH Related

   Demih Industry
   Demih Autoparts